Rail rail pressure plate is an indispensable equipment on the railway track, mainly to tighten the rail. There are different types of rail platens according to different methods of use. Most common rail platens are made of cast iron. They have good compressive resistance when used, even if they are rolled by the train for a long time, the damage caused is small. However, the track plate is placed in the field for a long time, and the maintenance of the plate should also be done.

The so-called rail pressure plate refers to the crane rail and the ground are firmly fixed connection parts, it is arranged along the full length of the trajectory, every 500mm set a group, a group for two, symmetric set on both sides of the trajectory, in the crane running state, it can be written straight and lateral impact. In the process of using the track press plate, we should pay attention to the related maintenance work.

1. Before operation, we should start to know the climate to prevent operation under bad conditions, especially in foggy and rainy days. If we have to work, we need to do a good job in lighting and anti-slip methods.

2. In the operation, the lifting machinery should be timely sorted out and maintained to prevent the risk caused by obstacles.

3, the site personnel wear maintenance, can not throw things, to avoid injury.

4, the operator reasonable division of labor, harmonious cooperation, comply with the command, can not be free to leave the job.

Rail accessories rail plate application: in the main body of the plate design of the oval long hole, so that the plate has room for adjustment; With the slope hole and the stop block, after fastening can effectively prevent the pressure plate channeling displacement. It is convenient for the side adjustment of crane track installation or maintenance.

Rail accessories rail plate application 2: the section of the elastic composite rubber pad is slightly convex in the middle, so that the force is reasonable. The small rectangular convex strip in the cushion plate is easy to deform, which not only makes the cushion plate and the track easy to contact, but also increases the elasticity of the cushion plate and plays a shock absorption role.

Rail accessories rail pressure plate application three: pressure plate fastening on the crane beam, will not loosen, not easy to wear crane beam. The symmetrical platen forms a wedge structure in the direction of the section, thus limiting the left and right displacement of the track.